Enerzone Solution 2.3-I Spezifikationen PDF herunterladen (Seite 46)

46 Solution 2.3 Installation and Operation Manual

Pedestal kit installation:

Follow step 1, 2 and 3 of the leg kit

installation.

5- Secure pedestal base to the

underside of the firebox using the

bolts, washers and nuts removed in

step 3.

Note: Insert each bolt from the inside of

the firebox, this will allow the bricks to sit

more evenly on the floor of the firebox.

6- Gently flip the stove back on its

pedestal making sure not to put too

much weight on the rear edge of the

base.

7- Secure the air control cover to the

brackets under the ash lip with 2

screws then install the coil handle on

the control rod by turning it

counterclockwise.

8- Secure the pedestal backing panel to

the rear of the pedestal.

9- Open the ash drawer lid then slide it

into the front opening of the pedestal.

10- Position the stove for its installation

and reinstall the door and the bricks

(see Appendix 9: Exploded Diagram

and Parts List for layout).

Note: Make sure that baffle components

have not moved during the leg installation

process since a flue blockage may occur.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 58 59

Keine Kommentare

Enerzone Solution 2.3-I Spezifikationen Seite 46