Enerzone Solution 2.3-I Spezifikationen PDF herunterladen (Seite 45)

Solution 2.3 Installation and Operation Manual 45

Leg kit installation:

4- Secure each leg (A) on support (B) using

(2) washers (C) and (2) nuts (D) supplied

in the kit. Repeat the same mounting

procedure for the second support.

5- Secure both leg support assembly to the

underside of the firebox using the bolts,

washers and nuts removed in step 3.

Supports can be installed on either side.

Note: Insert each bolt from the inside of the

firebox, this will allow the bricks to sit more

evenly on the floor of the firebox.

6- Gently flip the stove back on its legs

making sure not to put too much weight on

the rear legs.

7- Open the ash drawer lid then slide it on the

left and right bend of the legs support

brackets.

8- Position the stove for its installation and

reinstall the door and the bricks (see

Appendix 9: Exploded Diagram and

Parts List for layout).

Note: Make sure that baffle components have

not moved during the leg installation process

since a flue blockage may occur.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 58 59

Keine Kommentare

Enerzone Solution 2.3-I Spezifikationen Seite 45